NRK
-
Posts
17 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Store
Everything posted by NRK
-
Definitely de-soldering the PCB rebuild board and going with wires until i get really really good Thanks for your help and tips anyway
-
linked J1 and resoldered the point this thing still 3x boot and frag
-
but Dave, i already soldered a jumper wire on the chip exactly how described earlier in this topic still have to bridge J1?
-
i reflowed a couple times , checked with my multimeter still 3x boot cycle and frag
-
its an OpenXenium tried booting with no chip .. same thing happens rechecked everything and assured that every joint make proper contact , also checked for random solder speck around the working area and traces etc at least 8 times but still 3x cycle boot + frag its late for me atm i will post pictures tomorrow
-
im experiencing the exact same issue atm the first time i booted it it worked for 5 seconds and then my screen turned all green now it 3x cycle boot flashing green and red + the chip LED lighting red (static)... tried reflowing a couple time it does the same shit any tips to de-solder the LPC board ?
-
ignore this
-
Welcome aboard ! =D make sure your Xbox is not a 1.6 revision before snipping out the clock cap otherwise it wont boot anymore
-
lucky man ! have fun repairing the other one
-
thanks for clarifying
-
so if i get it right.. this bios let you read discs only if you boot the xbox with a disc already in the drive?
-
im waiting my 2tb + IDE to SATA adapter thanks for warning i guess i need to ftp this .bin in my hdd? and use hexen to install software i need to flash ? (im new to modding , usually watching youtube stuff about it)
-
my Xbox will thank you forever and for my part i will vouch your stuff anytime ! Surgery has been successful Dr.Dave
- 14 replies
-
- 2
-
-
- aladdin modchip
- installation
- (and 8 more)
-
I really appreciate your hints i will try my best to address those issues the red circle is just a wire i tried to connect to the "burnt" spot ( its not linked to anything ) what about the destroyed trace/point ? i could wire it to the same point as you and it would work? *wich is the red circle wire* the red circle is just a wire i tried to connect to the "burnt" spot ( its not linked to anything )
-
tried to install the aladdin xt plus2 on my 1.6 and ... last connection i had to make didnt go well ... i feel bad the point didnt want to tin, ended up destroying the point and traces around it is there anyway can i fix this mess ? https://ibb.co/FY4vbT0 https://ibb.co/nRq48GJ (its my first time soldering dont be too mean on me lol) thanks for future inputs
-
awsome piece of glowiness clean work +1
Board Life Status
Board startup date: April 23, 2017 12:45:48