Radio_Gra

I ended up finding patched xbe files online and they seem to work well. Still not sure why the xbe files which were patched via dvd2xbox didn't work but no worries.

The case seems to be closed. I ended up finding patched xbe files prepared by someone online and they seem to work well. Still not sure why the xbe files which were patched via dvd2xbox didn't work but oh well.

I am in the same situation regarding 007: Everything or Nothing. The game's xbe files were patched automatically by dvd2xbox when ripping my NTSC disc but the game boots to a black screen when I attempt to run it from the HDD. I have confirmed that the game launches successfully when I run it from the DVD and have tried to analyze the patched xbe files which look ok to me (they seem to include the proper hex values for the game's region and allowing the game to run from the HDD). Rocky5, do you have any thoughts on what the issue may be? Is it possible that I need an updated acl file for this game? I'm using a v1.6 Xbox and your latest softmod, by the way. Thank you in advance for any insight that you may have into this.

Thank you for your support. I actually tried to boot the game from the original disc and it does work without any issue so I'm thinking that the issue may be unrelated to resolution and may be related to launching the game from the HDD. I confirmed that the proper ACL file provided with dvd2xbox was used to patch the xbe files (this game has 2 xbe files) and have even opened the patched xbe files and confirmed that the proper hex values were used to indicate that the game can run from the HDD (and not strictly the DVD drive as the original xbe specified). Additionally, the region associated with each of the xbe files seems to be correct. I am out of ideas at the moment but was wondering if anyone else has run into this issue with 007 Everything or Nothing or any other game.

Hello, I am new here so apologies if I'm posting this on the wrong forum. I am currently running a v1.6 Xbox with Rocky5's Softmod (v1.1.7) and XBMC4Gamers and am met with a black screen when booting the game 007: Everything or Nothing from my HDD while using component cables. My legitimate NTSC copy of the game was ripped to my HDD via dvd2xbox (with ACL processing enabled) and I have enabled Force Progressive video mode via the NKPatcher settings (followed by a reboot). I have attempted to boot the game while the following resolutions have been enabled on my console: 480p (y) 720 (y) 1080i (n) 480p (y) 720 (y) 1080i (y) However, neither of these configurations seems to result in the game displaying properly. If anyone has any troubleshooting ideas, I would be greatly appreciative. Thank you.

I am currently using a set of component cables, but I've heard great things about this HDMI video adapter for those who don't want to go the internal HDMI mod route. The adapter seems to be in short supply as of late, but it is typically restocked on Sunday mornings.

I recently unpacked my v1.6 original Xbox and have had a blast modding it and checking out the homebrew apps!