Leaderboard

My boards are done and tested! All seems good! They still need pin header and test in Xbox (to test i2c). I don’t foresee any issues though. If all passes, I’ll try to get the board uploaded by this weekend. Also created a test firmware to ensure all components are working (aside from i2c). if you messaged me about wanting one… I’ll message you after final testing. Expect a message around Thursday/Friday.

XBMC4Gamers has had several revisions released and one change Google made required a change of the URL the app goes to download files. If you have an old version of XBMC4Gamers and also have a different replacement dashboard that you can use, remove XBMC4Gamers then download, extract and install (FTP upload) the latest release to your Xbox.

You're welcome! Sure I confirm you R13

Burned the midnight oil… boards are completed and fully tested (on 1.6 board). My initial board was also tested on a 1.0. Should be good for any revision… but again only tested on 1.6 and 1.0.

i think you need to have x2config.ini file in your harddrive, no idea where to get it and in what HDD location to put it. here, there is a tool to create a config. https://www.xbox-hq.com/html/article2052.html problem, you have to put is somehow in your HDD, maybe ftp would work during this bios screen, don't know.

If you can try another hard drive, ide cable, and or sata adapter if you can

It works!!! Read/write EEPROM (at least on a 1.6). All from microSD card. Fast and easy