Leaderboard

Have you tried connecting an Xbox directly to your PC? Crossover cable probably not required with a modern NIC. Just set a static IP on both Xbox and PC. If the problem goes away, you can focus on looking closer at your home network setup.

On C drive there should be a file called ind-bios.cfg if you use FTP to copy to a PC you can edit it and then replace it back on the Xbox. Right down the bottom of that file you will see 4 lines of text like this. "DASH1=\Device\Harddisk0\Partition2\evoxdash.xbe" "DASH2=\Device\Harddisk0\Partition1\Dash\UnleashX\unleashx.xbe" "DASH3=\Device\Harddisk0\Partition1\Dash\EvolutionX\evoxdash.xbe" "DEFAULTXBE=\Device\CdRom0\default.xbe" Edit it to this as this will set the 1st boot dash to xbmc on E drive, DASH1=\Device\Harddisk0\Partition1\xbmc\default.xbe DASH2=\Device\Harddisk0\Partition2\evoxdash.xbe DASH3=\Device\Harddisk0\Partition1\Dash\UnleashX\unleashx.xbe DEFAULTXBE=\Device\CdRom0\default.xbe If you have xbmc4gamers in E:\xbmc4gamers the make DASH1 DASH1=\Device\Harddisk0\Partition1\xbmc4gamers\default.xbe The X2-5035.67 bios is a 512kb size that will only flash to a version 1.0 - 1.1 TSOP or some mod chips and the configuration file should be on E drive root directory Download FatXplorer https://fatxplorer.eaton-works.com/3-0-beta/ Then you can connect your HDD to your PC and using Fatxplorer read/write as if it was a normal PC drive. Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

What dash are you planning to using? And what BIOS as Ind and X2 need a config file. My xbmc4gamers C drive looks like this My E drive looks like this All the games and emulators are on F and G drives Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

I flashed bios using the one you posted and that didn't need changing to bios.bin so I concur.

You can flash the Hynix TSOP with the EvoX flasher ( 2.2.3.2. Flash iND Bios (1.0 - 1.4) )

Did you make a folder named BIOS in the root of C drive and put the bios file in there named as bios.bin ?