Leaderboard

Same

Use the installer in the link provided and don't waste your time with Hexen. Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing.

That was me (I have made the OGXBox installer) and if you read the hole topic you get the point why I wrote that (and because of nin1). You are good with OGXBox installer. Check the "Folder links" for the version 1.0.3 Kaos has linked.

I would be interested in a kit to internalize an existing OGX360. Would you be able to provide those?

Electrolytic caps have a tolerance specification. Generally, +/- 20%. So, 3501uF is within spec for a 3300uF capacitor.

Just to confirm, Wireless Xbox360 on og xbox? If so them I'm interested but price is a factor.

? If you see the Evox logo, it is booting. Do you see the stock MS dashboard? If so, you are ready to proceed to the next step of modding the Xbox. Installation of the modchip to boot a modified Xbox BIOS is only the first step in hard modding the Xbox. Next, you need to download, extract, burn to DVD-R media then boot an installer disc (e.g., OGXBox Installer 2021 UX PBL v1.0.3) to install a replacement dashboard.

The Boot Partitions and Executables settings of the Evox BIOS may not be set to load your replacement dashboard. The default settings for them in the stock as distributed by Team Evolution-X are: C:\evoXdash.xbe C:\AvaDash.xbe C:\neXgen.xbe Where is your replacement dashboard installed on the Xbox's hard drive? Do you even have one installed? Is it booting into the stock MS Dashboard or stuck at the big X logo at the end of the startup (flubber) animation? What do you mean by (see next post)

Download the distribution version of Evox M8plus and EVTool v1.0.9. Extract both archives then run EVTool. Click on Open... and browse to the location of the file, M8plus_16.bin, to load the BIOS into the app. Change the LBA48 settings drop down selection, DVD Drive Check, and EvoX Logo check boxes as shown below: Note: Depending where your default dashboard is installed, you may need to make changes to the Boot Partitions and Executables section. Click Save as... to create a new dot bin file with the changes. Give the updated BIOS a different name (e.g., m8plus_16_LBA67_nodvd_or_logo.bin). Upload the new file to the BIOS subfolder where Evoxdash is installed on your Xbox. Run the Evoxdash and select the Flash BIOS menu option generally found under the System Utils option. Follow the onscreen instructions to complete flashing the updated BIOS to your modchip. After flashing the new BIOS is complete, the console will reboot and the Evox logo will no longer appear in the upper left-hand corner of the screen.

Version 1.0.3. - Fixed the Raincoat.ini where i made a stupid mistake because of copy and paste. (Huge thanks to: Traderjoe5245 for reporting this!) - Fixed the issue that the skin are not loading on Raincoat flasher. - Added the option to flash Sharp TSOP's with raincoat. - Added a new menu as 7 to miscellaneous. - Added Retail 2 Debug files in menu 7 as 7.1. This will just copy the needed files to E:\Retail2Debug. There is still work for you to do (Back your E drive etc.). AND there is mainly no need for 99% of the user to use this because it will have no use for you and you still need software for your PC and knowledge to use both of them! but it's a n2h. - Added xDSL Linux in menu 7. as 7.2 OGXBox Installer 2021 UX PBL v1.0.3 Folder link @ 1fichier for updates : https://1fichier.com/dir/mX1kipIz Folder link @ Mega for updates : https://mega.nz/folder/xUl13A4B#d_RMbhNrNA81QhgwoaUv4g OGXBox Installer 2021 UX v1.0.3 Folder link @ 1fichier for updates : https://1fichier.com/dir/mX1kipIz Folder link @ Mega for updates : https://mega.nz/folder/xUl13A4B#d_RMbhNrNA81QhgwoaUv4g The upload is in progress and the ISO's will show up shortly on fichier and after that i upload them to mega. The 1.03 PBL is already online.

Looks very sleek non the less.

Very Nice! awesome colors.

Short video showing some of the features and it in action