Leaderboard

Using the patched bios to run iso fils is not an X3 specific thing, as Kais has said above you can manually do it using any of the bioses he mentioned. I dont do it that way tho... If you are using XBMC4Gamers as your dash, its very simple indeed to do it. If you go to this post, i have a short but simple guide to do it using that dash. https://www.ogxbox.com/forums/index.php?/topic/1219-complete-xbox-game-collection-in-one-xbox/&do=findComment&comment=8190

I have reconditioned dozens of the Samsung DVD drives. A good cleaning and a fresh belt will certainly help. However, the sticking problem is most often caused by the magnet not releasing. There is a very simple fix. Get a circular sticker like the ones shown in the attached photograph and place it on the plastic spindle. It helps reduce the magnetic connection. I suppose you could also use some masking tape cut to size, in a pinch, which I have done. I keep multiple sheets of these stickers because every Samsung eventually has the same sticking issue.

I'll admit that when I first saw your post that I immediately thought "Great, now we've got SJW's coming for the mod scene,", thank you for the clarification on your original comment.and restoring my faith in the scene.

No explanation needed or should be given. It is not inherently racist even though MANY people try to make it that way these days. Leave it alone. Don't inject racism where there is none.

What video region? NTSC or PAL You need an original copy of one of the following games to softmod that has a game save for your region: Splinter Cell - NTSC or PAL 007: Agent Under Fire - NTSC MechAssault - NTSC Tony Hawk's Pro Skater 4 - NTSC, PAL and region free Any version of Splinter Cell will work - original release, Platinum Hits (NTSC), or Classics (PAL). 007: AUF: NTSC saves only and either the original or the working unpatched two platinum hits release. Image by HEX1GON @ AssemblerGames.com - 2014 MechAssault - NTSC only works with original release. Tony Hawk's Pro Skater 4 - ??? never used it so not exactly sure if any version will work or if later releases were patched.

The controller wire colors designations are: Red = +5Vdc White = USB Data- Green = USB Data+ Yellow = Video Sync Black = Ground Video sync (yellow wire) is for a light gun, not used by a standard controller. A light gun controller or standard controller have to connect to the console. One port handles both by including it. -- KaosEngineer

Thanks Randy - I leaned on the community pretty hard (still do with new things) when i got started, gotta give back . So much outdated info as these consoles have been modded over many years., it's good to have bullet point list that people can work from and do some research as they go.

Very impressed with how much time and detail you gave to a stranger. You are one of the good ones my friend. [emoji106]

Links to original post: http://xjet.50megs.com/photo.html You need a Mad Catz memory card for Xbox and USB cable Use a utility knife to shave a flat spot on end of card. You will notice a soft spot when you are deep enough. Cut out the soft spot. (end of usb cable should slide in firmly) Now modify usb cable. Cut end off cable with about three inches of wire left. NOw use utility knife to remove insulation from cable and connector. I also removed the metal strain relief from connector to shorten it up. Remove shielding and ground wire from cable(ground wire has no insulation. you should have black, red, white and green wires left) Now disassemble memory card. Remove circuit board from black rubber end, insert usb connector, slide circuit board back in being careful of wires. Now cut wires to legnth and solder start at left 1: black 2: not used (Xbox yellow wire) 3: green 4: white 5: red Now assemble memory card. Download and install Action Replay for Xbox from www.codejunkies.com. Plug memory card into usb port, windows will prompt to install driver. Select install from a specific location and browse to your install directory for Action Replay . The driver is in the drivers folder.(default would be"C:Program Files/Datel/ActionReplay Xbox/Drivers"). Once driver is installed start Action Replay and enjoy.

Here is the live link to download the Action Replay Software Action Replay Xbox v1.40 website http://uk.codejunkies.com/support/article.aspx?article_id=196