Leaderboard

It does for real..... So I put xbox360 slim inside a og xbox. I rewired the front panel work with original buttons and added one extra button for the sync button. Hardest part was to make the dvd drive to fit perfectly. I had to make some crude legs for it. I added larger fan, but then I was like that's not special enough. This sucker will be watercooled. That's more like it. Just need a little bit slimmer fan and install it under the radiator and cut holes to the top cover. It's a perfect fit. On the bottom window you can see the final resting place for the hard drive. Peace XD

Since I had taken these pics to show N64Freak to troubleshoot my DIY install of his internal HDMI mod, I figured I could also post them here. This is my 1.6 XBOX motherboard. Since it runs my arcade pedestal, I only needed the board itself. It is on wood and plastic spacers off the wooden base I created. Standard AladdinXT modchip. For a much quieter, and at least as cool if not cooler, machine I replaced the heatsinks with these GPU coolers. Works after a few hours of play and no temperature issues. Here is the Toslink optical port mounted (still having some issues getting sound out of it for some reason) And here is another view of the HDMI install. My advice for anyone else doing this install is to use good solder, good flux, and a HOT iron. And double check every connection with a multimeter, as from some of the install steps, there is no turning back to fix.

Did a HALO Edition, I installed all red LED's, then figured people may prefer green so I added a switch to the console. I tried to just add pictures but I seem to be at a limit. https://www.ebay.com/itm/113805187649

Here's a link from the Assemblergames boards to a spreadsheet made by Cyrix that gives a breakdown of about 300+ games and how they fare with 720p mode: https://docs.google.com/spreadsheets/d/1HpxKGQ6wVTRevUdQ6_4rkuyF_ZugOgc2C4tXnZxBZCk/edit#gid=0