Leaderboard

There is the lcd-mod made by x-addons a few years ago that allowed use of an LCD without a modchip. I have one that I used in a tsop flashed xbox. You can also use a modchip with it as it has a pass through pin header.

Hi all, Long time modder and lurker, first time poster but I wanted to share a project I have been working on the last couple months. It is a small PCB which allows you to use Wireless Xbox 360 controllers (via the Xbox 360 USB Wireless Receiver) on an OG Xbox console. The design is loosely based on another similar project I did for the Nintendo 64 console https://imgur.com/gallery/HVLea3d Following the release of this board another forum user sent me an email asking if this device could be adapted for the OG Xbox, and funnily enough that was the next thing I was going to attempt! I wanted to support the following features atleast: Up to four players with rumble support. 100% USB Bus Powered so no external power supply needed. Fast bootup time, so it's up and running in time for the OG Xbox. Low input lag. As always, this is a hard thing to measure, however I can say that an OG Xbox controller is polled by the console every 4ms or so. My software gathers all the Xbox 360 wireless controller data, collates it and generates all the HID reports every 4 ms aswell. It's possible an input may miss this 4ms window, so would happen in the next 4ms window. As you probably know, an OG Xbox controller is basically a USB HID device, however it has some custom requests and other slight differences, meaning that it doesn't work on a Windows machine without a custom driver, and conversely a generic HID controller will not work in an OG Xbox so there was some work in getting a reliable and compatible solution working. To support four controllers, it is necessary to have 4x Full USB device controllers. However I imagine most people would rarely play with 4 people at once so my design is modular meaning you can support anywhere from one up to 4 players as required to keep cost down. This is a link to the github repo with what I came up with https://github.com/Ryzee119/ogx360 A link to my etsy store where you can buy one pre-assembled https://www.etsy.com/au/listing/672315615/ogx360-add-wireless-xbox-360-controller Cheers!

https://github.com/Ryzee119/spi2par2019 Not to sure why this hasnt been spotted yet no doubt he will make a release thread on it in the next few days this is just a heads up ogxbox legend Ryzee119 has done it again for anyone who has a Xenium modchip and wants lcd support with temp status fan speed and compatable with everyapp that i could find that has lcd support. You bloody ripper cheers Ryzee119

Thanks a lot for these, great pack

nice skins, nice and clean

thanks for this

https://mega.nz/#!WLQHgSLI!EWQpbRhKOJOvSFLynwyM9sXRgwTFrBM6PB42xGGsx_E This is the latest with 212 games supported instead of the original 156 then 188 and 201 he's released. See EarthwormJames' post at emuxtras.net for the list of additional games added from 201 to 212 release. The latest update info will be posted in that thread.

Thank you

Thanks

hello friends some time ago I made some videos of preview for hypervision, premium, ninja are not so well done but of something they serve videos.rar