Leaderboard

Dear All, As you know, the stock fan of original Xbox is quite loud, and given the age about 15 to 16 years I decided to upgrade/replace the fan, read some forums and some suggest the Nexus 70mm Real Silence fan, which has an airflow of 21.1 CFM, but since I'm from Europe this fan is not available almost in no place, owing probably to being an older fan design, looked for alternatives, and some suggested a Noctua 80mm which we need to butch the HDD plastic bay to fit on the box, but there's also a 60mm model, which fits excellently which is NF-A6x25 FLX. that address an airflow of 29,2 CFM which is better than the first solution Nexus 70 mm. Alright connected the fan with the 4 anti vibration rubbers and this is the final result. Still haven't replace the thermal paste, that's going to be my next project, really now I have a quiet XBOX on my hands

I've been asked about hot to internally install my HDMI mod into an Xbox. Well i finally found the time and did such an install properly! As i don't like soldering wires all over the place i went a different route and made it a permanent install replacing the original Video Connector. Cause who would use an old composite cable if you have an hdmi out right? Audio is provided through the HDMI signal of course and it supports 5.1. And with the 3D printed plate to cover the rest off the opening it looks perfect in my eyes. And the best part it does almost not need any modification to the Case! Well except trimming a tiny bit off the DVD caddy so it doesn't touch the PCB. The PCB itself does fit into any revision console and is relatively easy to install. Any thoughts about the install?