All Activity
- Past hour
-
Updated to 1.3.0 Changelog in the description.
- Today
-
That capacitor is just to smooth power goes into the SPDIF port. It has nothing to do with the actual signal itself. Start by cleaning the AVIP cable and port connections. It's possible you have some dust causing poor contact. Try connecting a generic high intensity red LED between the outer legs of the existing SPDIF port and directing that into your SPDIF cable. If that works but the port does not, it's the SPDIF port burning out. Also try using the SPDIF output from the xbox to another device like a cheap Cmedia CM6206LX USB sound card or Turtle beach DSS. Try another device with SPDIF audio out to your current sound system (again cheap CM6206LX sound card is great for this).
-
Thanks for the tips. I will look over it again. It is of course possible the cabling has hidden damage too. But all the visible wiring looks ok. The optical port is rather worn out though. It had a broken solder joint and the little door barely closes. I wonder if an electrical arc from a broken solder joint could damage it. The port connection also has a lot of play in it. I dug around Digikey and found a replacement emitter assembly that looks remarkably similar to the original, and also bought a replacement cap. We'll see what happens!
-
This is causing some memories to surface. After playing with these prebuilt releases from around the web, and finding IGR non-working, I looked around more and found the github with python patcher: https://github.com/gaasedelen/titan I patched an original m8 Plus myself and the patch itself is what disables IGR. I don't think you can load the final patched builts into EVTool.
-
Sorry, no ini. I was mixed up. With EVTool, you couldn't enable IGR to work?
-
I didn't have any INI in use. I think I tried EVTool on it. Actually I think I even tried taking the original m8 Plus and patching it myself and the patch caused IGR to be disabled.
-
It may have been a non-standard button combo. Or more likely, or hard-coded off with EVtools when patching.
-
These 128MB EVOX ROM modifications. I think they are based on m8 plus? I tried a few of the UDMA builds for non-HDMI systems on my v1.0 and IGR wasn't functional. I also found some talk elsewhere about IGR not working with it.
-
@tiertop Expanding upon Marty's post here, it may be possible that there is a short or something fishy about grounding that is causing attenuation/dimming in the LED or blocking the data signal from reaching the transmitter entirely. Definitely look at ALL the wiring in there.
-
Can I solder a USB cable directly to an Xbox controller board?
Bowlsnapper replied to tktagmedia's topic in Hardware Mods
There is not currently an "open-source" or alternative solution to this adapter (communicator). Although with all the Halo 2-ness that is happening, a solution is being explored by multiple people. I know that alternative sources for the existing supported chipset are being explored as well as possibly other solutions. A generic audio adapter will not work, as far as I am aware. -
Looks like you’ve started to lose strands here. I’m assuming this is the cable that the case has ruined, as you mentioned. I don’t see anywhere else that I would personally start my troubleshooting. If you’re capable, I’d repair that connection and see what happens.
-
What does “these” reference?
- Yesterday
-
Dang, thanks, I just check it. Thanks a lot!
-
now 5
-
snapcaseacilec joined the community -
Can I solder a USB cable directly to an Xbox controller board?
snapcaseacilec replied to tktagmedia's topic in Hardware Mods
So would using a USB MIC/Headset work through the controller if I do not have a OG Communicator / headset? -
If I remember right IGR does not work with these.
-
I think they are available on Etsy. I bought one there about a year ago. It works well. I've been using it with an 8bitdo wireless adapter and primarily a XBO or PS4 pad. There is a quirk in that the 8bitdo won't pair with the controllers on power up unless I press its connect button.
-
ppu-pro_Or joined the community -
A few more photos. It is so incredibly basic inside. I had to repair the green component output years ago because the horrible molding caused a wire to eventually break. They charged $50 for this! I don't know if I think a wire is broken. Moving the cable around while it's operating doesn't affect anything. Analog audio and component video are working fine. A cap replacement is easy to find but I'm not sure how to shop for an emitter.
-
Could also be a broken wire inside the cable not making it detect signal perhaps?
-
Not much to replace there... There's a ceramic capacitor, but I think those rarely go bad... Maybe try replacing both that and the SPDIF LED module?
-
My HD AV Pack is no longer outputting a working optical audio signal. The receiver acts as if nothing is connected. The AV box is producing the red light but it is noticeably dimmer when compared to my TV's optical output. I tried two optical cables and two XBoxes. Inside the HD AV pack, the optical audio section is on a mini PCB and has a tantalum cap, as shown in the photo. Could this cap be going bad and causing the LED to dim?
-
ThePhenomenalOne joined the community -
bitmonger joined the community -
i have also tried something else and this may indicate an issue with the Xblast OS i have on the chip, If i install an Aladdin XT with Cerbios, it boots and detects the full 128mb or ram, so the xblast OS im using which ive used before on a 1.6 with hynix Ram worked fine, but on a 1.6 with the samsung ram as pictured, works up to bank 3 but not bank 4 - attached is a dump of the 1mb OS i have on my xblast Aladdin - if anyone can see whats up with it to not work with the ram im using that be great lol *also, if i install bank 4 FIRST it does not work, there is something about bank 4 that xblast does not like lol* V16 XBLAST
-
me337 joined the community -
first thing ive tried, its very strange, only affecting Bank 4
-
You seem like you are an experienced guy... I'm sure you tried another chip just in case that one is DOA?
-
Hi guys, having a bit of an issue that is trolling me, V1.6 xbox using all K4D263238M-QC50, The ONLY bank i have a problem with is bank 4 and ONLY bank 4, i have no bridges this is not my first rodeo, using xblast all banks 1-2-3 are fine, ONLY when i install the 4th bank, the console just turns on and stays green light with no display, kinda like a coma console, its weird, if i REMOVE bank 4 and boot up, it will boot into Xblast and Test 1-2-3 ok, its not my soldering, i have NO idea why its only doing it with bank 4 - its not caps, its been re-capped, any help would be great
Board Life Status
Board startup date: April 23, 2017 12:45:48