IPTDF00 Posted December 13, 2018 Report Share Posted December 13, 2018 I have 5 boxes, two 1.4 rest 1.0-1.1. and during my families quarterly big amazon order "Of Savings" I ordered a few aladdin chips at 3.99 each. At this point i have done more than a few tsop and general softmods. I have Zero fear when it comes to physical installs of components (minus ram. I dont have a hot air station yet.). So is there any benefit to installing the aladdin chip to any of my non 1.6 systems? Even if the benefit is small i am interested as my truer passion with all of this is to create the ultimate best of the best systems. Quote Link to comment Share on other sites More sharing options...
Xbmcmodsforxbox Posted December 13, 2018 Report Share Posted December 13, 2018 No not really unless you had like a rare chip or a cool chip like the xecuter 3 chip there is really no point only use the mod chips on the 1.6s Quote Link to comment Share on other sites More sharing options...
KaosEngineer Posted December 13, 2018 Report Share Posted December 13, 2018 (edited) No additional benefits using the Aladdin XT plus 2 as it only holds 1 BIOS. However, they can be modified by reprogramming the CPLD (Lattice LC4032 chip with a JTAG programmer) and swapping out the 49LF020 (256KB = 2Mbit flash) with a 49LF080 (1MByte = 8Mbit flash). Install the XBlastOS (256KB) and have 2 additional software selectable BIOS banks: 1 - 256KB and 1 - 512KB. https://assemblergames.com/threads/mod-aladdin-xblast.55068/ Edited December 13, 2018 by KaosEngineer 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.