AlaskaCC Posted October 10, 2018 Report Share Posted October 10, 2018 I have a version 1.4 console with a modchip installed due to a bad TSOP flash. I cannot seem to find the location of the A15 point to attempt the repair process. Can anyone point me to an image? Thanks. Quote Link to comment Share on other sites More sharing options...
XPeter Posted October 11, 2018 Report Share Posted October 11, 2018 (edited) You may find some pictures from: http://xbox.x-pec.com/chameleon/index.html especial this picture (the left wire) It should be below 5th pin of TSOP counting from left Peter Edited October 11, 2018 by XPeter Quote Link to comment Share on other sites More sharing options...
AlaskaCC Posted October 12, 2018 Author Report Share Posted October 12, 2018 Thanks @XPeter. I had looked very closely at those images and determined they were from a 1.0 or 1.1 board. The silkscreen labeling on my 1.4 version board does not look anything like that, which is why I was hoping to get some input. Quote Link to comment Share on other sites More sharing options...
XPeter Posted October 12, 2018 Report Share Posted October 12, 2018 You may check the picture on psyko_chewbacca's project site: https://bitbucket.org/psyko_chewbacca/lpcmod_os/wiki/xblast_lite_manual/Installation However, it only shows A15 point on backside of the mobo. If you know how to trace it, then you may find the front A15 point (which I never try) Here is the link about tracing Xbox mobo solder point. But I don't think include A15 Hope this is helpful ! Peter Quote Link to comment Share on other sites More sharing options...
AlaskaCC Posted October 14, 2018 Author Report Share Posted October 14, 2018 I will have a look. Thanks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.