preddy Posted July 7, 2018 Report Share Posted July 7, 2018 hi i have been given a v1.0 and someone removed a chip refilled lpc and and all box does if frag is there any v1.0 lpc diagrams available thx in advance Quote Link to comment Share on other sites More sharing options...
KaosEngineer Posted July 8, 2018 Report Share Posted July 8, 2018 LPC Debug Port = http://xboxdevwiki.net/LPC_Debug_Port Filled holes doesn't mean it's destroyed. V1.0 has no pin 4 as only on v1.6 consoles. A TSOP reflash could have been attempted that failed. Bad / missing BIOS - FRAG. First, install a modchip using pin header install method. Not guaranteed to fix the console though. However, FRAG'ing can occur for so many reasons. If any major system component fails during startup tests it is indicated. Modchip install to check one possible erring major subsystem - TSOP/BIOS loading. 2 Quote Link to comment Share on other sites More sharing options...
JohnA Posted September 9, 2018 Report Share Posted September 9, 2018 1.0 are always filled. Quote Link to comment Share on other sites More sharing options...
Kekule Posted September 9, 2018 Report Share Posted September 9, 2018 maybe the video adapter is bad, that would cause a FRAG too, have you tried a different cable? Quote Link to comment Share on other sites More sharing options...
Quark Posted October 21, 2018 Report Share Posted October 21, 2018 I'm having the same problem with a 1.0, it's last owner tried to install a header for install a chip on it and I think he has messed it up, anyone know where I can find altenative soldering points for the lpc port? (1.0) Quote Link to comment Share on other sites More sharing options...
ironsniper1 Posted October 22, 2018 Report Share Posted October 22, 2018 2 hours ago, Quark said: I'm having the same problem with a 1.0, it's last owner tried to install a header for install a chip on it and I think he has messed it up, anyone know where I can find altenative soldering points for the lpc port? (1.0) what chip is it? Quote Link to comment Share on other sites More sharing options...
Quark Posted October 22, 2018 Report Share Posted October 22, 2018 TSOP? Hynix Quote Link to comment Share on other sites More sharing options...
pocket Posted December 13, 2018 Report Share Posted December 13, 2018 On 10/21/2018 at 7:55 PM, Quark said: I'm having the same problem with a 1.0, it's last owner tried to install a header for install a chip on it and I think he has messed it up, anyone know where I can find altenative soldering points for the lpc port? (1.0) Did you see barnito's post in this forum, LPC diagnostics? I had the same issue and it helped. Try testing with a multi-meter between the LPC and the test points first to make sure there is an issue with the LPC pins first. Then solder to the alternate points if necessary. 1 Quote Link to comment Share on other sites More sharing options...
wikati Posted December 13, 2018 Report Share Posted December 13, 2018 10 hours ago, pocket said: Did you see barnito's post in this forum, LPC diagnostics? I had the same issue and it helped. Try testing with a multi-meter between the LPC and the test points first to make sure there is an issue with the LPC pins first. Then solder to the alternate points if necessary. THIS^^^ I had forgot about this, 'twas a dark cold night, and the lpc header removal had gone awry....... ya, that post saved me one time. totally have a look at that. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.