Dezra Uriko Posted April 20, 2018 Report Share Posted April 20, 2018 after tsoping my 1.0 i was able to switch to a 1.4 with ind bios. is there a way to do a custom xbox start up when powered on? Quote Link to comment Share on other sites More sharing options...
KaosEngineer Posted April 20, 2018 Report Share Posted April 20, 2018 (edited) You can by creating the proper files, .x and .bmp, and editing the ind-bios.cfg file to use them instead of the defaults. CUSTOMBLOB=\Device\Harddisk0\Partition2\flubber.x ;Enable custom Flubber from c:\flubber.x CUSTOMLOGO=\Device\Harddisk0\Partition2\mslogo.bmp ;Enable custom MS Logo from c:\mslogo.bmp CUSTOMX=\Device\Harddisk0\Partition2\xlogo.x ;Enable custom X Logo from c:\xlogo.x CUSTOMTEXT=\Device\Harddisk0\Partition2\text.x ;Enable custom Text from c:\text.x are already set to use optional graphics. However, if these files are not found on the HDD, the BIOS's built-in content is displayed. I've never done it before so not quite sure what tools are needed to create the dot x files: flubber.x, xlogo.x and text.x. Edited April 20, 2018 by KaosEngineer Quote Link to comment Share on other sites More sharing options...
Kevin Fox Posted April 22, 2018 Report Share Posted April 22, 2018 Did you get this fixed? you can also download a preconfigured Config file Quote Link to comment Share on other sites More sharing options...
wikati Posted April 23, 2018 Report Share Posted April 23, 2018 tiny bit of info here Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.