Take a moment to join us. You can sign in with Facebook with a couple of clicks. No need for a lengthy registration. We also have Tapatalk support so you can use this forum on your phone the same way you use facebook. It will keep you notified.
I'm not sure if this is the correct forum but here goes...
What's the best way to clone a 2TB SATA Xbox HDD to another 2TB drive?
I have an Inateck FD2002 that is a dual SATA USB 3.0 dock, that has an offline cloning feature, but every time I try to clone my 2TB Xbox SATA HDD using the offline cloning feature, I initiate the clone function, then it briefly starts the process, but the dock restarts itself. The USB cable is not plugged into it.
I came across this skin a little while ago and I really like the look of it, but I was hoping someone could help me with the video previews.
I have them working, if you move over and click on the game preview, but in the thread below there is come code that enables you to view the previews by just pressing down on the dpad. However I have absolutely no idea where the provided code goes. Can anyone help me out please?
Please login or register to see this link.
use an eprom (27C2001/27C020 or bigger) or flashrom (29F020 or bigger)
connect pins 22, 24 and 31 of the eprom to GND (pin 16 of the eprom).
you might have to connect 31 to 5V (pin 32) if you are using a flashrom.
Reset is A18 on this diagram.
FOR XBOX v1.0/v1.1
The two unused points are only two additional Adress-Lines for the Chip (with which you can access everything beyong 256 kByte) ... so they are NOT needed.
FOR XBOX v1.2/v1.3 (Thanks to D-BlooD who posted this diagram on Please login or register to see this link. )
FOR XBOX v1.4/v1.5 (Thanks to pcmerc who posted this diagram on Please login or register to see this link. ) WE is the location you jump on the bottom of the board along with the other point on top that is standard on all motherboards. These are the write enable for reflashing the TSOP.
Pad 33 is also known as link to 32 in previous pinouts.