eliteslater Posted January 22, 2021 Report Share Posted January 22, 2021 I have a bad 1.0 PSU and a good 1.5 PSU. It is as simple as color matching matching the 1.5 wires into the 1.0 connector or does a certain red need to go to a certain pin in the connector? Quote Link to comment Share on other sites More sharing options...
SS_Dave Posted January 22, 2021 Report Share Posted January 22, 2021 2 hours ago, eliteslater said: I have a bad 1.0 PSU and a good 1.5 PSU. It is as simple as color matching matching the 1.5 wires into the 1.0 connector or does a certain red need to go to a certain pin in the connector? The reds are all linked on the PSU so it will not matter what order they go. The same for the Black wires The 3.3 volt wire is a different color between the 1.0-1.1 and the 1.2-.14 PSU as well as the PowOK and PowON wires on some PSU's Cheers SS Dave Soft modding is like masturbating, It gets the job done but it's nothing like the real thing. Quote Link to comment Share on other sites More sharing options...
nbaj Posted December 31, 2022 Report Share Posted December 31, 2022 was looking for this thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.