Take a moment to join us. You can sign in with Facebook with a couple of clicks. No need for a lengthy registration. We also have Tapatalk support so you can use this forum on your phone the same way you use facebook. It will keep you notified.
hey everyone, i replaced the cap in my 1.6 xbox and also finished the modchip (atleast i hope i did) and before i hooked up the dvd drive and hdd i tried to test it but all it does is come on and then go off and it does it twice and then on the last time it comes on and flashes red and green over and over, the mod chip has a orange light on and i am also attaching some pictures of my wire job let me know if i did something incorrectly
EDIT: i looked for a different diagram and found i had done two wires wrong and now it is booting perfectly!
I have a 1.0 version motherboard. I just did a tsop mod to it.. Actually I had another 1.0 motherboard that I bricked by flashing a bios from the xbox autoinstaller disk it was the 1mb x3 bios that bricked the board and I do not want to make that same mistake again any one got any bios recommendations. At the moment I have the evo from hexon 2018 disk f and g
So finally they are completely ready and for sale now
I can offer 2 Versions off the cable:
-The first offers stereo audio on the HDMI signal and 5.1/digital audio through the optical port.
-And one second does offer 5.1/digital audio on the HDMI sigbnal and through the optical port.
The price for the cable that only has stereo on the HDMI signal is 65€ (~87US$) +shipping cost 3,70€ (~4,30US$) and paypal fees.
For the fully digital version that also offers 5.1 through the hdmi signal the price is 70€ +shipping cost 3,70€ (~4,30US$) and paypal fees.
You can choose between black and white for the case color. I do also offer the Case with a cutout or as a completely closed case. You can easily illuminate the case with a couple 0603 leds and resistors. Solderpads for those are present!
Got a couple HDMI cables ready in both the full 5.1 Version and the version that only offers stereo through the HDMI connector.
If you have any questions just drop me a PM!
To use the cable the Xbox needs to be set to NTSC region and then just plug it in and you connect your console to your hdmi TV!