Jump to content
OGXbox.com

Jamesdude353
 Share

Recommended Posts

Updated 4/25/17

Slim Xbox Original Laptop Build

Photos are attached below.

Hey everyone this is a log for my very own Ultra 5cm Slim Xbox Original Laptop Build. The goal for this build is to keep the Xbox originals originality by using the Xbox original case and to slim it down into an Xbox original laptop with wicked accessories.

The Xbox will be cut down to just above the controller ports. The sides of the lid and the back corners of the lid will be cut off, sanded and reattached to the bottom of the case. The Xbox will then have a removable top plastic flat cover and or palm rest added to the case to replace the original lid. The original lid will no longer have sides or back corners on it, the lid will be cut to fit a Laptop LCD screen which will be powered on through the Xbox's Molex cable by using a shortened Y splitter cable. This cable will turn the Xbox's hard drive on and the Xbox's LCD screen on.

The Molex cable Y splitter, splits the Amps the new Xbox pico psu outputs while the voltage remains the same. The LCD screen will either be a 15.6 inch laptop screen or a slightly smaller screen around 14 inches and will have a frame on the front of it and a cover on the back of the lcd.

Two Xbox jewels will be used at the moment on this Laptop build. One jewel will be used and attached either in the center and or bottom right of the Xbox's LCD screen back cover. Another jewel will be cut into a rectangle around the Xbox logo and will be flipped over to the Xbox indentation logo side and displayed on the front of the console.

There will be two to three models of the Xbox Ultra Slim Laptop at the moment, one will include two wireless controller inbuilt and will be the first model, and will be build into the Xbox Original case. The second model and third model details are yet to be released.

Accessories included

The accessories which are included are:

  • The Xbox disc drive, modified into an external sata drive which can be plugged into an Xbox when its off and used easily for ripping games and playing disc games. The Xbox has to be turned off while plugging the drive into the new sata ports on the side of the Xbox and turned off while unplugging the drive.
  • An Xbox original wireless handheld portable home device with a controller inbuilt into it. This is similar to a wii u like controller. The idea is to be able to walk around the house and be able to play Xbox as you go. These will be available for sale and the transmitter and receivers have already been tested and do transmit the video signal to screens away from the Xbox.

The Xbox original will be powered by a 12volt DC 250watt pico psu, the psu is capable of outputting 20 - 20.83 amps.

Whats inside the Xbox

  • The Motherboard.
  • The controller ports, LED modified.
  • The 12 volt DC 250w Pico psu.
  • A heat sink with an 80mm fan to cover the CPU
  • A laptop IDE to sata adapter connected to the hard drive, the laptop hard drive will be positioned over the av and lan ports at the back of the console, between the ide slot and the gpu heatsink. A modified 80 wire ide cable will be used to keep the build tidy.
  • Two Xcm wireless controller transmitters, which can be turned on and off by the use of switches on each transmitter. There will be four controllers used for this and only two can work at one time. Two controllers will be made into Wireless Xbox Portable Devices. Xbox will still be fully capable of handling wired and other plug in wireless controllers by turning off the transmitters inside the Ultra slim Xbox by the use of switches on the right hand side of the Xbox's.
  • The Xbox will have the capacitors replaced to increase the amount of size available inside of the Xbox, by installing aluminium electrolytic capacitors which are smaller.
  • The Xbox will contain one battery.
  • A LCD driver board to connect the LCD to the Xbox's video signal.
  • Two speakers connected to the driver board, receiving the audio signal from the Xbox's motherboard.
  • An 80 wire ide cable.
  • A Molex Y Splitter cable.
  • A wireless xbox original internet receiver.
  • An Ide to sata adapter on the left hand side of the Xbox positioned next to the ide port for the Xboxs external disc drive and other external accessories.
  • LED Strips
  • A custom assembled ATX cable.
  • A 5volt sb to 3.3 volt standby converter made by me
  • A 5volt sb to 3.3 volt standby converter final made by and purchased from N64 Freak.
  • A 1tb - 2tb laptop drive.
  • In total 2x 1tb - 2tb laptop hard drives drives, In the bigger laptop model, through the use of a hard drive selector and possibly modified original disc drive.
  • Switches to allow for the turning on and off of the wireless Xbox controller transmitters and for the swi
  • An additional fan port
  • GPU heatsink
  • Additional fans
  • Power button
  • Eject button
  • Plastic to isolate the laptop hard drive and ide to sata adapter from the motherboard.
  • Four Xbox Screws for the controller ports
  • Six Screws to replace the Xbox original case mount screws. To hold the top casing with the bottom casing.
  • HDMI Composite converter board, purchased from N64 Freak.
  • Slide in DVD drive, possibly in this model or another model, although will only play burnt games and dvds and not Xbox Original games at this stage.
  • Eight 1500uf 6.3 volt capacitors to replace the original 1500uf capacitors and the 3300uf 6.3 volt capacitors.
  • At this stage possibly a new soldered on board ATX right angle plug for the Xbox original.
  • At this stage possibly a new soldered on board ATX right angle plug for the Pico Power Supply.
  • Xbox hard drive isolation and Xbox hard drive ide to sata adapter isolation.
  • Xbox power supply isolation.
  • Xbox heatsink isolation support.
  • 15.6 inch or 14inch laptop screen with matching driver board.
  • Additional 64mbs of ram, to make the Xbox have a complete 128mbs of ram.
  • Xbox duo x chip or aladdin chip.
  • Multiple USB ports, to allow for mouse and for inbuilt directly wired keyboard functionality for use on the Xbox Originals XBMC dashboard and on the Xbox original avaliable operating systems, including at the moment Linu , Windows 98, and Windows CE.

The Xbox External Disc Drive

  • Power button will be cut off from the eject board/power on board and wired directly back to the eject board while the eject board is mounted else where in the case.
  • The IDE port will have an IDE to sata connector directly wired to it for the external disc drives port to best fit in the Xbox Ultra Slim Laptop, while a single double ide cable will be used to go from the ide port directly to the laptop hard drive.
  • The disc drive will be made an external accessory by using its own IDE female to sata adapter plugged which will be plugged into the back of disc drive and use a sata cable to connect to the sata ports on the side of the Xbox Ultra Slim Laptop.
  • An Xbox dvd drive power cable extension and port will be added as follows, Male to Female connector, which then goes from the Female connector to the Xbox left hand side mounted Male connector. The male connector which will be added to the side will allow for the power, eject in, eject out, to be connected to the drive.
  • To avoid the Xbox throwing an Error from the drive not being connected in general, the Xbox will be chipped or tsop flashed.
  • If the sata doesn't work due to the Xbox originals DVD drive adapter not having a slave pinner, an ide cable will be used instead.

The Wireless Controller Device

The Wireless controller device will include a video transmitter connected into the Xbox originals av port which will be powered by the Xbox's power new pico power supply or battery power included within the Ultra Slim Xbox Original Laptop Build. The transmitter is capable of transmitting the Xbox's video signal to another LCD screen when the video receiver is plugged into the composite av video port if that LCD screen. The video receiver will be powered by battery and will be connected to an LCD screen. The LCD screen will have a wireless controller build around the screen, inside of a custom case, which will likely be build out of an Xbox original case, to keep the Xbox's original case style. The back of the device will have an Xbox Original Jewel mounted.

The wireless controllers being used are XXX XCM Wireless controllers these controllers are power by battery. The power required to use the controllers, an LCD screen, blue tooth speakers and the video receiver will be combined within the handheld device and the batteries will be rechargeable.

The Project Log 1

Here's the ultra slim laptop at the moment. I have cut the power and eject button in half and will jump the power to the eject board. The eject button will be mounted on the front of the Xbox.

The power button will stay in its originally place.

The eject half circle hole where the eject button used to go will be fitted with leds for an on light and standby light. The original led lights for the Xbox errors will be present still.

The power supply is a 12volt, 250 watt power supply, that will be turned on by battery. The power supply is almost set up at this time, although the wiring is not yet finished at this time.

The Xbox is working at this stage with the new installed capacitors.

17990847_1323366491086105_124854142631100443_n.jpg.c23415c6e12ea9bf510dfd16c35cf13a.jpg

18010099_1323366531086101_507268898118266804_n.jpg.bdd557e24620be96dbd95071bcb67757.jpg

18057709_1323366567752764_2607069194530206174_n.jpg.71cf64b401f808636be2bfb341922baa.jpg

18057792_1323366517752769_877256466033762699_n.jpg.e366c30c7d8590ac79a7a9b91de9e614.jpg

18057878_1323366534419434_4169405553805544550_n.jpg.5673d73cf6ae1456e3f057b405d6a137.jpg

18119310_1323366644419423_8781357094852993841_n.thumb.jpg.b46c24de9c1a4567e3101f6637e16ab5.jpg  

18119514_1323366621086092_2511669258175973778_n.jpg.c8d18890438877b6f300ab0442a68f2c.jpg

18119515_1323366561086098_688296838958514137_n.jpg.7ce7884661ea329939b3f5cea5934fc5.jpg

18119558_1323366594419428_388733179369964375_n.jpg.7920a8a4c98aad36069642a369e958ea.jpg

 

 

IMG_1721.JPG

IMG_1730.JPG

IMG_1733.JPG

IMG_1734.JPG

IMG_2120.JPG

IMG_2121.JPG

IMG_2123.JPG

IMG_2128.JPG

549AB0C9-C7A0-47B8-82C3-1D934CDB1352.jpg

IMG_2218.JPG

IMG_2219.JPG

IMG_2224.JPG

IMG_2228.JPG

IMG_2232.JPG

IMG_2237.JPG

IMG_3043.JPG

IMG_3044.JPG

IMG_3049.JPG

IMG_3050.JPG

IMG_3052.JPG

IMG_3054.JPG

IMG_3789.JPG

IMG_4006.thumb.JPG.080f839b3a20082a94c32b7c70666113.JPG

IMG_4007.thumb.JPG.d77a3bdc9563cf218fd8a1064cd5efb0.JPG

IMG_4008.thumb.JPG.bba68ad6d810153a05e3a815f01af556.JPG

D1071E22-A944-4D1F-8769-3ABEE7F51AF9.thumb.jpg.f54478725ee5bef172d2d85069e1d0fd.jpg

IMG_4064.thumb.JPG.4412c7b7556a1a93d8488bbab1ce6df8.JPG

IMG_4065.thumb.JPG.de7bc68ef46adb36a0b6e442b47e5f41.JPG

 

8DD19906-3599-49FC-A0CC-D68AD20E96DE.jpg

Edited by Jamesdude353
Adding information on what the project includes. Will need to edit photos later.
  • Like 1
Link to comment
Share on other sites

  • 2 weeks later...

Ultra Slim Xbox Original Laptop details update,

I have purchased two Joytech Xbox original screens to help me add on the Laptop screen. The lcd screens inside the Joytech screens will be removed and replaced with a replacement screens. At this time the Xbox screen will be powered off of a Y splitter Molex cable. These screens will not be used in the end product. The Xbox screens are only being used for testing if the Xbox can power them through the Molex cable. If the test is succesful which it should be as voltage remains the same on both split Molex ends although amps divide the laptop screen should be possible to power on compared to these older more power consuming screens. The screens have been posted from England, The United Kingdom to Melbourne Australia. I have now received the screens and will test one of them shortly.

The next step at the moment is to order solid state capacitors to replace the Xbox originals general electrolytic capacitors. Using solid state capacitors will allow for much more room in the Ultra Slim Xbox Laptop which is necessary and or almost required to fit everything within the xbox with ease. At this point the capacitors which will be replaced are as follows:

These capacitors have been replaced

  • The 6.3 volt 3300 uf capacitors with five instead of three 6.3 volt 1500 uf capacitors. These capacitors do not make up the entire value of the x3 3300 uf capacitors although it should not matter in this case. Other Xbox revisions have the original x5 6.3 volt, 1500 uf capacitors installed instead of the 3300 uf capacitors. 3300 uf x 3 = 9900 uf, the new value will be 1500uf x 5 = 7500 uf. This leaves a difference of 2400 uf.
  • The original Aluminum Electrolytic capacitors will be replaced with smaller new Aluminum Electrolytic 6.3 volt, 1500 uf capacitors. These capacitors remain the same value.

By replacing these capacitors, it will be possible to fit a isolation bridge for the power supply to be mounted to and an isolation plastic sheet to protect the components on the motherboard from the hard drive IDE to sata adapter.

These capacitors will be replaced if possible without bending extending and bending the capacitor legs over and or connecting capacitors in parallel.

  • The 16 volt, 680 uf capacitor
  • The 25 volt, 100 uf capacitors

The Xbox will need to fit overall a 1cm heat sink spread across the GPU. The heat sink comes with an 80mm fan attached to the heat sink and there will be a small fan attached to the original fan vent at the back of the Original Xbox. I was originally planning to use a heat pipe which are much smaller although finding the right size at the right cost is difficult and it is difficult to find one suitable for both the CPU and GPU.

The Xbox needs to fit a laptop hard drive on the left hand side of the Xbox, this is where the DVD drive was originally  located. This laptop hard drive includes a IDE to sata adapter that uses a modified 80 wire IDE cable. I have successfully shortened a 40 wire IDE although this Xbox will most likely require an 80 wire IDE cable.

These cables have three rows of pins on the IDE component compared to the 40 wire which has only 2 rows on the IDE component and because of this the 80 wire IDE cable is much harder to shorten. The three rows of pins will need to be tested with a mulitmetre to make sure none of the wires are touching each other. Only one end connector and the middle connector will be removed and reattached to shorten the cable.

The IDE cable when installed in the Xbox will be attached to two sata to IDE adapters. One adapter will be for the hard drive and one adapter will be for the external disc drive. I have a second option which is to solder one adapter directly to the Xbox motherboard and attach it to the motherboard. This will allow for a much shorter two way 80 wire IDE cable instead of the longer three way cable.

The IDE cable attachment goes as follows,

IDE cable to Xbox Motherboard - to IDE to sata adapter (hard drive) - to IDE to sata adapter (for the external disc drive)

or

IDE cable to Xbox Motherboard - to IDE to sata adapter (hard drive) - to IDE to sata adapter directly wired from IDE port on the Motherboard to the IDE port on the IDE to Sata adapter.

The testing screens are shown below.

Images attached.

s-l1600 (5).jpg

s-l1600 (1).jpg

 

s-l1600 (3).jpg

 

 

 

Edited by Jamesdude353
Link to comment
Share on other sites

Just had a quick look at the screen and i hope you can use them. But i guess those screens won't use an 8bit LVDS interface.

The ones i had in my hands have been quite crappy screens inside that used an composit analog video input. If they use such a controller that's built directly into the panel electonics you can't simply swap them against a laptop panel. Once you receive them please open them up and look for the panels model number so i can check that for you.

To use a Laptop LVDS panel you need a controller that converts your video signal (Composit, RGB or component) to a LVDS signal the panel can interpret and display. On eay you can get relatively cheap electronics that do exactly this the only downside is they often don't accept rgb or component and the results with composit is quite frustrating. But something like this would be a good alternative if your screens aren't compatible! Example LVDS Controller

Hope your screens are compatible but if not you at least know there are alternatives out there! :)

  • Like 2
Link to comment
Share on other sites

  • 3 weeks later...
  • 1 year later...
  • 7 months later...

an idea i have seen before for slim heat sinks was xbox 360 gpu heatsinks modified and drilled to suit, these were the early type without the heat pipe, he had 1 on the cpu and 1 on the gpu with a 1cm thick 100mm fan flat on top of both sinks, his temps were near normal.

but thinking about it the later type with a heatpipe might work too if you have enough thickness, it depends if you can get the heatpipe in there, failing that laptop heatsink and fan arrangements are very efficient and they are thin, look at the picture in this post.

this is from a thinkpad x60s but you will get the idea this would do both chips, or you could go with a single one on each chip like is fitted to t420 thinkpads.

thinkpad coolers punch way above their weight, and dont forget core2duo/core2quads run hotter than pentium3/celeron so they may even drop temps compared to stock.

just some ideas.

tpad..jpg

Link to comment
Share on other sites

  • 2 months later...

This is an amazing endeavor, and I myself plan to attempt something similar. However, I'm planning to just make a super slim OG Xbox with the original case or even build a new mini case. I plan to use a picoPSu like you and even possibly attempt an SSD upgrade. There is also an idea to use a slim DVD drive (as I want to keep a drive).

Any updates on your project would be awesome!!!

- MandoMan

Link to comment
Share on other sites

  • 3 weeks later...
  • 1 month later...
  • 4 weeks later...
  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.