By Frank D'Agostino
recently got a debug kit I have been trying to look for ways on how to FTP 2 debug kit. The only media this would read that will allow you to FTP is the dashboard Avalanche. These were made on the Old Source codes that's why it can read it. But you really want the Alpha version it's a special version (Alpha v0.49.1)
This is the only Dash or program this debug kit will play. Once it boots up go into file manager using the CD to get there. Copy files from DVD drive into the E partition you can make a folder call it apps and place individually everything on the contents of the CD you made... once that is done you can reboot the system open Avalanche go into FTP settings. You want to change your IP address to whatever you have on flashfxp or Windows .. once you are linked you can pull off any programs that you want to make a copy for yourself. Another thing you can do is download an app called retail game loader V 1.20. This app will allow you to play retail games as well as emulators or anything the original Modded Xbox can play. How you use it is once you FTP to hard drive and is complete reset the system then under xdk launcher click on the newly installed app retail disc loader V 1.20... once that is launched it will look like the exact same Dash except now you can load anything you want. I was giving a lot of help from a lot of different sources in order to make this post to this form. Please if you know any other tricks leave a comment below if not this will work for sure I've tried it myself 100%. Thank you very much for reading have a great
I recently picked up a box with Xkiller Xecuter 2 and while trying to make a USB cord for it, I somehow fried the circuitry for port 2. I had another box for spare parts and tried swapping the headers, no luck. My real questions are
A: Do they make controller hubs (like a 2 or 4 way splitter) that I can just plug into port 1 so that I can still have a 2nd controller detected? I've searched everywhere and couldn't find one and if not
B: Can I just splice the wires (on the internal plug) that go to port 2 on to the wires for port 1 and still have it see the second controller when plugged? I'm thinking so since it is just a USB interface... But I would love some input before I try.