Search the Community

I'm just wondering if an XBlast Lite is required for the TSOP features or if the os will see a 1mb TSOP and options for TSOP management should appear... Or would the chip have to have a certain cpld and I would have to program it first?

It was hard to get a good image, I think I damaged the board pretty bad. I figured my years of recaping crt's and some smd soldering here and there would make me qualified. I think I might have seriously damaged it beyond my repair abilities, I had such a hard time trying to make that joint (I made the mistake of using flux), any advice on what to do now? worried I might be S.O.L

Hello, I'm looking to Recover a bad Tsop Flash on a 1.4 board. I have an Aladdin XT on the way which will be my 3rd chip install. Been looking around and have a few questions. First, I understand being able to disconnect the D0 wire once booted with the chip would give me the option to tsop using Xblastos. My question comes from something else I'm looking into Eeprom recovery using a raspberry Pi, It accesses the I2C connection and pulls the Eeprom. Could I use the Pi and an LPC pinheader to reflash the original bios via tsop in a similar method?

Dear, all Xbox fellow I had a spiderchip since 14 years ago for my xbox, which is still working. ABout 2 weeks ago, I wrongly flash 512kb bios into my xbox (1.1) TSOP (1mb), causing it unbootable. I was trying to find a way to recover the TSOP, and one way was to use a modchip with special bios "tsop_m7.bin" for recovery. So I did flash the spiderchip with tsop_m7.bin. But I forgot my DVDROM is not working, so this method is not workable. And eventually the TSOP issue was resolved with "3-wire trick". Now, the spiderchip is left useless without normal bios, and it seems the guaranty way for recovery is to use external programmer, which I don't have and don't know how to use. There are some forums discussed quite good success of using modchip hotswap, and even Softmod to flash modchip (NOT TSOP). So I decided to use most cheapest way - softmod - to recover my spiderchip. But as my Xbox 1.1 mobo is soldered for TSOP flash, I don't want to revert back to stock status. I remember my cousin has a Xbox 1.5 (softmoded) which has not been used for long time. Borrowed from him, still can turn on, BUT ERROR 07, reconnect/changing IDE cable didn't work. Changed to another HDD, Error 06, obviously it should be the HDD issue. My cousin doesn't have eeprom backup in PC, but he is quite sure it was backed up inside the 8G xbox HDD (WDC). So I tried many times to do HDD hotswap connected to my laptop through USB-IDE cable and XboxHDM (Windows version), no luck, the Xbox HDD lock status is alwasy enabled. NOT sure it is because of wrong timing or USB-IDE problem which may trigger the HDD to relock. In actual fact, the easiest way to access locked xbox hdd is to use modchip, but the spiderchip is useless with tsop_m7.bin bios inside. Out of sudden, I was wondering, Can this special bios be used to re-flash the modchip? According to the steps in https://assemblergames.com/threads/1-0-1-5-tsop-recover-bios-tsop_m7-bin.54493/ , A15 & D0 need to be removed in sequence in order to activate TSOP, but I am not aiming at TSOP, so I don't remove the A15 & D0, Should it work to re-flash the spiderchip? Anyway, I have already tried last night, and I am facing the problem to boot to the Orange Xbox logo (tsop_m7) on this Xbox v1.5. Previously i had nearly no issue to get the orange xbox logo on my xbox v1.1. when chip-in with this spiderchip. The v1.5 Xbox remains with black screen for 1-2min, then shutdown and reboot automatically, However, there about 3-4 instances, when I can see the orange logo, ONLY BY slightly lifting the spiderchip off the board (then re-seat?). But that is not always working. Out of this 3-4 instances of seeing orange logo, only one instance could move to a new blue screen saying the xbox hdd need to be formatted, do you want to proceed? Surprisingly, it is not HeXEn DVD main menu, which I am expecting. I understand the spiderchip is solderless, which is not stable in terms of contact with LPC, But I am quite sure that, as long as using my finger to press the chip into the LPC, the spiderchip is working perfectly, But why is so for xbox v1.5 , do I need to shortcircuit or ground some points Peter