Search the Community
Showing results for tags 'electrolyte'.
-
It has been some years since our beloved xBox was released and some parts have begun to decay. It is commonly advised to remove your clock capacitor and replace any leaking. 1st step, clear any leakage. It's acidic afterall and you'll need a tight grip. 2nd Gently pull at the capacitor being removed while applying heat to the solder with your iron. 3rd Once removed, prepare your replacement capacitor. The longer pin is usually positive. Align these with the holes your old capacitor was soldered into. If you are unable to push it through, apply heat to melt any solder blocking the hole. 4th once pulled through, bend each pin iutward to hold the capacitor position. You don't want it falling out or becoming loose. Apply solder at the base of each pin. 5th trim pins just above the solder. I used nail clippers as they were able to achieve a shorter trim. That and i misplaced my wire cutters. Refit your motherboard etc Power up and pray
Board Life Status
Board startup date: April 23, 2017 12:45:48