Search the Community

Hello recently found my old modded oG xbox, dont know what kind of mod it is. Iknow it had Evolution.x(xbmc). So when i click the power button it sounds like it wants to boot up but shuts off. when i click the eject button the xbox turns on goes right to clock setting and it allows me to play disc games on it, i tried a couple discs and the games loaded up fine, however not downloaded games/emulators on hard drive. When i look in the memory i can see saved files of xbox games that are saved on the drive. Took it apart and see there is a blue chip installed, labeled (duo x2). And its blinking red. Not sure if thats my problem. can anyone help, thanks.

https://www.retrorgb.com/retro-fighters-wireless-xbox-controller.html Pretty cool they’re finally releasing wireless controllers for the XBOX. It seems a pretty good controller and cool to see that hall sensor sticks becoming more the standard. Pre-orders are open between 15th March til April 1st. Shipping is in October. I’m grabbing a pair

I have this xbox PSU TUSCANY model but with missing components ,and i wanna repair it Can anyone help me with missing components reference. thnx.

For sale Xbox Original eeprom reader / writer Soldered using 60/40. Shielded usb cable 9 pin serial connector Tested and works! Asking $8.00 + $2.00 Canada post standard shipping. Total of $10.00 Canada Only! e-transfer only! PM if interested thanks.

On a modded PS2 and Wii you can play games directly from iso images. This can also be done a Xbox. You just need some tools, some attach/default.xbe's the correct bioses and some dashboards. I have tried to follow a tread on xbmc4xbox and another one on emuxtras on how to do this. But I gave up as it was unclear to me where to get hold of the attach.xbe file and also if i had to re-flash my bios to make this work. I wonder if someone here can make a good tutorial on how to make this work. ( I use xbmc4gamers as my main dash, And i have two xboxes, one with evox m8+ and one with indbios 5004. ) Thanks,

Will take best offer!!!

Hello everyone! I will tell you about my problem: I have an Xbox 1.0 with TSOP and 128Mb of RAM (I bought it pre-modified), I have tried to install an Aladdin Xblast by soldering the pinheaders to the LPC port and soldering point D0 of the motherboard to D0 of the chip (I have also tried soldering D0 from motherboard to ground on motherboard) and got FRAG. I have followed Barnito's Lpc Diagnostics (V0.1) guide (https://www.ogxbox.com/forums/index.php?/topic/239-lpc-diagnostics-v01/#comment-945) to verify voltages and continuity. With respect to continuity everything is correct except pin 2 and with respect to voltages everything is correct (+-10% of the correct voltage) except pin 1 0V and pin 5 1.7V. If I disconnect the D0 cable from the chip or ground, or if I disconnect the Aladdin chip, the console boots correctly with the Cerbios bios that I flashed in the TSOP and boots my Xbmc4gamers. What could be the problem? (if photos are necessary, I'll take them later when I get home from work)

Hi all, Long time modder and lurker, first time poster but I wanted to share a project I have been working on the last couple months. It is a small PCB which allows you to use Wireless Xbox 360 controllers (via the Xbox 360 USB Wireless Receiver) on an OG Xbox console. The design is loosely based on another similar project I did for the Nintendo 64 console https://imgur.com/gallery/HVLea3d Following the release of this board another forum user sent me an email asking if this device could be adapted for the OG Xbox, and funnily enough that was the next thing I was going to attempt! I wanted to support the following features atleast: Up to four players with rumble support. 100% USB Bus Powered so no external power supply needed. Fast bootup time, so it's up and running in time for the OG Xbox. Low input lag. As always, this is a hard thing to measure, however I can say that an OG Xbox controller is polled by the console every 4ms or so. My software gathers all the Xbox 360 wireless controller data, collates it and generates all the HID reports every 4 ms aswell. It's possible an input may miss this 4ms window, so would happen in the next 4ms window. As you probably know, an OG Xbox controller is basically a USB HID device, however it has some custom requests and other slight differences, meaning that it doesn't work on a Windows machine without a custom driver, and conversely a generic HID controller will not work in an OG Xbox so there was some work in getting a reliable and compatible solution working. To support four controllers, it is necessary to have 4x Full USB device controllers. However I imagine most people would rarely play with 4 people at once so my design is modular meaning you can support anywhere from one up to 4 players as required to keep cost down. This is a link to the github repo with what I came up with https://github.com/Ryzee119/ogx360 A link to my etsy store where you can buy one pre-assembled https://www.etsy.com/au/listing/672315615/ogx360-add-wireless-xbox-360-controller Cheers!

hello, i'm looking for one or two hdmi mod to buy, first seen it is in this forum but seems the guy is not active anymore. on castlemania, i missed the stock reflow this weekend. if anyone have some for sale, im from france and would be happy to deal with ya. cheers

Finally found the time to test the Adapter PCBs i built to use an ATX Psu to power an Xbox. They are plug and play to easily switch between the original psu and an atx-psu.Might be usable for casemods or laptop builds. The adapter is built around the following basic schematic. It properly convert the Standby voltage from 5v to 3,3v and also shifts the power_ok and power_good signals to the correct levels. Also built a small version that can be used to build an extension cord style adapter to save some more space. Just let me know if you have any questions about them

Does the XboxHD+ fix the 480p issue on 1.6 xbox's?

HI. I have this: I bought this Xbox on Ebay for over 1k and it turns on by itself overnight & won't turn off. In the past it would take idk, 30 tries before it finally turned off. Now, the power button itself is not working and I'm on about idk, 70 try's on hitting "power off" from the dashboard. The only solution is to unplug it but I don't like that I have to plug it in every time. I would like to swap cases with another Xbox (preferably NOT modded) but have no experience in opening up an Xbox and I'm not up for the challenge. I'd rather ship it out to one of you to have this done or just buy another one when it comes up on Ebay. I'm not looking for a repair as I don't trust it & might I add: it had a full recap of all capacitors. If any of you have an original Xbox and know how to swap cases, perhaps I could pay you if I shipped it out to you (I live in NJ). Thoughts/suggestions?

Hello people. managed to pick up a very very cheap xbox. only paid a 10 quid for it but its mint. only thing it switches on automatically when its plugged in. i did check for traces and 1 is gone but i will jump these when my wires come. clock cap his been desoldered but 3 power caps are gone which ive ordered and will change was going through some old stuff and managed to find my xecuter v26 CE. i had this for years and luckly i still kept it. replaced this with X3 so i kept the old 1 now my questions. will this work on my 1.4 will it need reflashing as i cant even remember what bios was on it (been so many years) i have all the wiring, fresh as in never been installed. does any 1 have a guide on how to install. i think 3 wires just need soldering. as my X3 was a solderless install and of course if i do need a reflash, can any 1 suggest a good bios CHEERS GUYS. MUCH APPRCIATED

I got a xbox og with no hard drive can I fix it?

Hello, i have this power Board 1.1 Version 220 volt with burned parts.. I like to know the value of resistor, can someone help me? Thanks

Hey all, first post as I stumbled across this page while trying to research my halo edition xbox. I pulled it out of storage and wanted to sell it as I havent used it in forever and am fairly out of the video game collecting these days. Memory is pretty fuzzy on this as it's been awhile, but I bought this new when it came out, used it a good amount and then ended up putting the Xenium Ice modchip in with the solderless adapter. It's been in a closet for at least the past 10 years. I believe the hard drive and disc drive are original, almost positive I never replaced those. I hooked it all up and tested it, works great, the only game I had laying in the closet with it was Sneak King, so I tossed that in to confirm the drive still worked, no issues. The case looks great, no cracks. It is missing one of the rubber feet. Controller, power and video cables are the original ones that came with it. I'd like to get $300 + shipping for it, but am open to offers. Pics attached and happy to take others if anyone needs.

Hello! I decided to open up my softmodded Xbox made in july 2002. It has partially stopped working around 2008 and I remember replacing the hard disk did not help it back then. I dont remember the exact symptoms it had, but I remember considering it broken so I bought another one for cheap and stored this one for 15 years. So I wanted to give a try of repairing it today after learning about the clock capacitor problems, considering the fact that the console is still very clean globally and even have the OG box. When I first tried to turn it on, I had nearly no image showing on the screen, except a very dimmed and freezed green circle in the middle. I turned it back on and everything seemed fine, I was able to play a game with no problem for 5 minutes before deciding to turn it off and open it to have a look. Here is all the photos I took. The clock capacitor obviously leaked, but I can't quite tell how far the acid went as the whole board seem covered in dust. I plan on cleaning the surrounds with vinegar and then with IPA, but I don't know a lot about electronics so I wonder if there was anything you would do or avoid to do in this case. Also, can the softmod mess up something or has it likely absolutely nothing to do with potential failures? I must have played the console 1 or 2 years with the softmod without problems before it broke. Thank you all for your precious help!

Decided to post about my ATX to Xbox adapters as i've been contacted about them a couple times now. I won't build more of them in the future as it's quite a time consuming process but you can order the PCBs and build them yourself. The bill of materials is printed on the bottom layer and assembly is pretty straight forward too. The solder work isn't hard to do so even a beginner is able to get it done! You can order the PCBs here: Rev1.0-Rev1.1 Rev1.2-Rev1.5 The ATX Port and Cables can be reused from a dead (or unused) Xbox PSU and motherboard. The end result might look like this 2 examples here:

Guys, anyone with experience in C programming? I need someone's help to compile a project of an image converter to .XTF for HL2 Xbox and I have everything you need thanks to a friend from the XeNTax forum and he wrote to me, but I need this to be compiled together with some more information contained in other files.... Someone to compile all the codes for me? In this case it would be in python or C xtf.bt imageformat.h vtf.h itexture.h

Hello good evening guys, I need to clear a doubt about the Xbox HD and the chip.... Come on, My Xbox 1.6 already has the Pin headers installed, and I want to buy Chipmod PROJECT STELLAR, I just fit it in and ready? Since you have everything done.... and another thing I'm going to buy a HD Western Blue, would that be the right one?

Hi everyone, I have a xbox debug kit for sale. Its the transculent green, unopened xbox with the original seals intact. Ofcourse with a green transculent controller, 128mb ram and the xdk launcher dashboard. Price €800

Well the “Xbox artwork installer” is out, although it’s only on my downloader that comes with XBMC-Emustation and XBMC4Gamers. Currently prebuilt is 1072 Games with full artwork and synopsis information. There is more artwork done but that’s for specials and homebrew/emulators eg... these aren’t part of the installer. But you can download and manually install them from the github link below. Also a big thanks to everyone who scanned the disc and sleeves of all the Xbox games over at Emuxtras. If you want to make your own artwork or manually install the artwork you can get everything you need here. Link: XBMC4Gamers Artwork Github Full artwork source, 23.1GB worth so it’s big :eek: (removed, as to many downloads effect downloader and all files on this account) Link: Full Artwork Source Google Drive (23.1GB) Here is a preview of said artwork prebuilt ready for the Xbox. Link: 007 - From Russia With Love

Hello. Does anyone know where to go to get XBOX Save Games (UDATA/TDATA) other than GameFaqs? Note: These are SAVED GAMES for Original XBOX. I’m primarily looking for Racing Games so I can unlock all cars, courses, tracks, etc. Ideally, they would be NTSC version of games. These two sites have a lot of Saves Games but I am wondering if anyone has a collection or another site they can refer? Thanks! https://gamefaqs.gamespot.com/xbox/category/999-all https://legacy.downloads.diomtec.com/homebrew/warchives/xbox-saves/

When I was looking for a extra gamepad, I came across a "duke" gamepad including a whole Xbox for 10 bucks, I couldn't resist not taking it Everything works, but inside the Xbox it looks like it has a 1.0 board. I've read things about the Foxlink PSU in 1.0 units... and this one has the Foxlink The pins on the AC connector are slightly movable and the solder is cracked, but working. After taking the picture I resoldered it. Is resoldering the only fix for it to prevent melting away some day? Second thing is the fan on the GPU heatsink which makes noise the first minute it's tuned on. The same noise PC fans make when they are worn. But with a PC fan I can remove the label to reveal the bearing and put a drop of oil in it, letting it run quietly again for a couple more years. But removing the label on this GPU fan doesn't reveal the bearing. Is this fan repairable in a different way?