-
Posts
16 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Forums
Calendar
Store
Everything posted by Vendest
-
I confirm that the bios banks do not show with the Xblast lite chip unplugged, only the on board tsop is seen in Xblast OS. I have not tried the eject button nor in recovery mod. Will give it a try! Thanks
-
Hi, I have a RAM upgrade and TSOP flashed with non-patched iND5004.67. Trying to troubleshoot the XBOXHD+ after install today, there is a permanent green light and a on/off blue light. Could someone advise what is the meaning of the blue and green led? Thanks!
-
Hi, I recently damaged my xbox while installing MakeMHz HDMI, I shorted the video encoder chip and killed the motherboard. I swapped the motherboard since then with a 1.4/1.5 (FOCUS), salvaged the xblast lite modchip but the xbox does not boot once D0 is wired. Xbox does auto on/off twice then turns on with fast flashing light. This is the same pattern I usually get when I have a short during 128mb ram install. Also I thoroughly followed the instructions https://bitbucket.org/psyko_chewbacca/lpcmod_os/wiki/xblast_lite_manual/Installation Long story short, the on board tsop is flashed with xblast OS and I can see the available banks of the modchip when D0 is not connected. Is there way to test the modchip separately and eventually fix it? it is the best modchip I ever used till now and would hope to make it work again. Thanks,
-
Hi, thought I'd share a quick story about picking up a faulty xbox I got it to work easily by replacing the 5 x 1500uf capacitors (common fix) I was surprised to find a different modchip than the good old aladdin. It is an Apple-X VI which is supposed to have 2 x 512kb banks according to https://www.ogxbox.com/forums/index.php?/topic/17-modchips-generation-3b-from-xbox-scenecom/ However I could not flash a bios any bigger than 256kb on each of the bank. Not a biggie as the onboard tsop can support 1mb. Booting from the onboard tsop by pressing the eject button and from the modchip by pressing the power button.
-
HI, I bought the Halo 2 jewel from Chimeric system and would like to know if I must use super glue or is there another way to fix it nicely? The top case is ready with original jewel removed, I used sand paper and added a bit of spray paint to cover any scratches. Thanks,
-
Hi, I am listing for sale a xbox kasumi blue, asking price $300 + shipping at cost from Singapore. The original mobo 1.0 has been removed overtime and replaced with a rev 1.4 and matching PSU rated for 220v The xbox includes a 500GB HDD type IDE, an Open Xenium modchip loaded with both X2-5035 and Ind-bios, 128mb of ram No other mod on the external case aside from 3D printed feets I have owned the set for about 12 years then acquired a regular xbox about a year ago which I modded to my liking and therefore made the xbox kasumi blue redundant. Link to actual pictures of the set https://imgur.com/a/yrCkuyV You'll note that the pillow case is missing and was missing from day 1 when I bought it from Japan. Any other items meant to complete the set are available. I do not have feedback on the ogxbox forum but I have received good feedback on the neo geo forum for selling most of my arcade hardware http://www.neo-geo.com/forums/itrader.php?u=62671 Thanks, Jerome
-
Issue is now solved, it is fairly stupid of me. While I enabled 720p in the system settings in 4gamers I never realized that the display apparence must be changed in the appearance settings as well. Thanks,
- 6 replies
-
- 1
-
- 720p
- resolution
-
(and 3 more)
Tagged with:
-
Yes the tv supports all sorts of resolutions or as low as 480i in both component and hdmi
- 6 replies
-
- 720p
- resolution
-
(and 3 more)
Tagged with:
-
Hi, I am unable to display in 720p thru component cable. Using modern 4K TV with component port 480p / 720p are enabled in MSdash, Unleash X and XBMC4Gamers (booting 4gamers by default) The cable is OEM xbox 360 repurposed to fit OGxbox. (mode 2 and 3 enabled) I have an open xenium with LCD that displays the current resolution. I tried to boot from different bios Ind.5004 and X3.5035 seems to be locked to 480i Ind.5004 and X3.5035 (forced480p) gives me 480p but nothing else. While I understand that not all games are compatible with progressive scan, the dashboard and apps should run at 720p or am I missing something? Thanks
- 6 replies
-
- 720p
- resolution
-
(and 3 more)
Tagged with:
-
Sorry for the double post and for the initial post since there is an obvious video calibration in menu settings. It's all good now
-
Hi, I am having some issues displaying the OGXbox skin in full screen. I've lowered the font scale to 1 but even then, sides of the screen seem out of bonds. widescreen or 4:3 doesn't help much either. Any advice on the right settings to apply? I really like that skin and would like to make it work nicely Using component cable for 720p resolution. Thanks
-
Those are 3300uF / 6.3v but not all mobo use the same ratings cap. The v1.0 mobo I have, has 1500uF / 6.3v installed. You'd better off checking the existing cap ratings (shown on the side of the capacitor)
Board Life Status
Board startup date: April 23, 2017 12:45:48