R9anSmart

Hi, Just picked up a Xbox, softmodded it and nulled the HDD etc. I then went to change the drive over to my cloned 1TB drive (which worked when switching it out from the mother Xbox for testing) and when I now boot the new softmodded Xbox with the confirmed working, nulled cloned HDD from the mother, I boot into error code 13. Cloned 1TB in question works when swapping out with mother Xbox's 1TB drive (which it was cloned from) Replacing the HDD with the original HDD lets the console boot and work. What am I doing wrong to get error 13 from the 1TB cloned, nulled, HDD from the other softmodded Xbox that works. p.s Using Rocky5 and 1TB HDD shows up under chimp loader as slave and have locked the HDD via this with the console (even though both consoles have nulled HDD's) Pulling my hair out with this one now, any help would be appreciated (Both consoles are of the same motherboard version and are all but identical)

Last thing, Any manual or guide to using this software? Everything else I'm good with thanks

Setup a clone using this today and relocked the cloned drive after. Working as far as I can tell and all data there so must be okay.

Thank you all for the comprehensive answers and information regarding this

I also assumed that as they advertising faster cloning it would not be sector by sector. Any freeware programmes that I can run from Windows computer, assuming the offline cloning of my Dock in incompatible. I know HDD RAW copy has been mentioned a few times. I have used Acronis before for Windows cloning and am aware of clonezilla however again unsure of the clone method used.

Anyone able to find out the clone method that this product uses please? http://www.tecknet.co.uk/ud037.html

Any known solutions/product for upright storage of a console to lessen the desk footprint?

Thanks for reply guys. To be clear I have a locked hdd that I want to clone. All my softmod are nulled eprom. So if I unlock the drive, clone it, I can then have the clone as a backup, unlocked and them if needed relock it with the nulled key (or whatever hdd key) for it to then work on any nulled softmodded console? I have no chipped consoles at this current moment in time however do have one on the bench that should be ready soon. Thanks again

Hi, I have the same situation my end. I have several console that I want to clone a nulled (all my console have nulled HDD's), locked 1Tb HDD from. I still have the original HDD for this xbox (again nulled) My question is, if I unlock my 1Tb HDD and clone the files to the other HDD's, can I use my original Xbox hard drive to boot from and relock the HDD's using Rocky5's chimp loader without losing any of the data due to formatting or whatever. I think that this will work in theory however don''t want to sink hours into doing cloning etc and then lose my game files etc and start again. Thanks

I recently did this with the cheapest cheap sata to pata adapter from eBay HERE and I also powered the 2nd HDD using the paperclip trick with a computer PSU and can confirm that it worked fine for me. Have you nulled the HDD key yet as this is the only think I can see that you may have done different to me. If not deffently null the hdd key using Rocky5 softmod, backup your console and try again.

Hi, I'm a user in the UK who has a large collection of PAL games. What I would like to know is how to setup my softmod so that I can run NTSC backups in HD without loosing the ability to play my PAL games. If possible it would be good if I can keep the primary region as PAL as these are the copies I have of Splinter Cell etc. Hoping that there is something easy that I can do to enable this that I have overlooked. Thanks

Ummm silly question maybe however can I do a FTP to the Xbox via connecting the Ethernet to my PC and sending direct down the Ethernet cable rather than going over my local network as doing small files like this is fine but not got the patience for larger transfers at them kinda speeds. If so and pointers before I try work it out from scratch?

Thanks for help and suggestions on this one. I have successfully softmodded both my Xbox's with Rocky'smod as suggested. Now just play around with it to get HDD installed and see what I can get it to do. I'm trying to get my hands on a non-1.6 board as we speak so to do a TSOP mod and see how that goes. May end up modchipping one of these Crystals someday if that goes well. What would you suggest is the easiest modchip to install to a board that is worth the time? Think that I may end up getting obsessed with this sooner or later. Or maybe it's already too late Thanks again

My solder skills are advantage so if I am able to boot backup discs and launch games from HDD via softmod only them I'm happy. Just need to learn how it is I do this without screwing up my Xbox's

Done and updated however got rid of the OG dashboard from the C drive, can I restore this? Any video links or further guidance to this process as don't have enough knowledge to do without cocking it up? Again, unsure how to set these as the default dashboard so any videos or guides? This was the original plan however unable to as have been unlucky to pick up Crystals at a v1.6 board so trying to work the best softmod alternative