retroMCR
Members-
Posts
14 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Store
Everything posted by retroMCR
-
Try: xbox
- 371 replies
-
- hexen
- hexen 2018
-
(and 3 more)
Tagged with:
-
In that case I suppose that would be your eeprom. Is your xbox softmodded or hardmodded or tsop?
- 371 replies
-
- hexen
- hexen 2018
-
(and 3 more)
Tagged with:
-
The password is: A , Y, B, X . Then press start
- 371 replies
-
- hexen
- hexen 2018
-
(and 3 more)
Tagged with:
-
well, I tried using the monster component cables and before going to the gentoox screen, the screen went black lights flashing red and orange and the disc drive ejected.. looking online I saw this: that was my problem too, used the regular av cables and I was able to flash. Maybe because is a 1.4 xbox? those have different video chips. maybe a compatibility issue with 1.4 consoles.
- 371 replies
-
- hexen
- hexen 2018
-
(and 3 more)
Tagged with:
-
No, it will not brick your xbox. after the 5 sec it will ask you to insert a boot disc and close the dvd drive. you can just turn off and on the console to start again. Make sure you are not using a component coble to flash a winbond, you will get a black screen. use regular av cables.
- 371 replies
-
- hexen
- hexen 2018
-
(and 3 more)
Tagged with:
-
Hi Everyone, As the title says, how can I set xbmc4gamers as my dashboard on a TSOP xbox. current dash is unleashx. Thanks,
-
Black Screen After 2tb Hdd Upgrade, Bad Sata Adapter?
retroMCR replied to retroMCR's topic in Hardware Mods
Now another issue, G partition is showing as 0 MB free, see image below. https://image.ibb.co/ets1RU/20180814_180700.jpg https://image.ibb.co/cqBvmU/20180814_183605.jpg https://image.ibb.co/cVJKD9/20180814_184029.jpg -
Black Screen After 2tb Hdd Upgrade, Bad Sata Adapter?
retroMCR replied to retroMCR's topic in Hardware Mods
sorry guys it was my mistake. it is working now. The IDE cable was incorrectly connected, (upside down) -
Black Screen After 2tb Hdd Upgrade, Bad Sata Adapter?
retroMCR replied to retroMCR's topic in Hardware Mods
Well, I just got the startech adapter and is doing the same thing.. don't know what to do. Could this be a bad 80 wire cable? Adapter: https://www.amazon.com/gp/product/B00EOJNGC2/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1 HDD I'm using: https://www.newegg.com/Product/Product.aspx?Item=N82E16822235013 80 wire cable https://www.amazon.com/gp/product/B000I21Y28/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1 -
Black Screen After 2tb Hdd Upgrade, Bad Sata Adapter?
retroMCR replied to retroMCR's topic in Hardware Mods
Thanks, I also noticed that the power indicator LED on the adapter is not turning on . The adapter is defective. But yeah when I put the old HDD and original 40 wire cable the console turn on like normal. -
Thanks for the advice,Ordered a startech from amazon
-
Hi Everyone, I have a Winbond TSOP flashed 1.4 xbox, Using EvoX M8+ F and G bios. Used the Hexen 2018 disc. just upgraded to a WD 2TB HDD. After upgrading I got a black screen. I put everything back to normal (original HDD) and is working. The adapter I'm using: SATA Adapter Cable I'm using: 80 wire cable Video of xbox turning on: https://www.youtube.com/watch?v=qTHcKnIUwF4 After looking at the SATA to IDE adapter, the capacitors looks bad. They have some white stuff. Could this be the adapter? the adapter is set to master Capacitors: https://image.ibb.co/bP0yd9/20180808_190838.jpgInsert other media https://image.ibb.co/mQ5mWU/20180808_190845.jpg https://image.ibb.co/cpgRWU/20180808_190852.jpg
Board Life Status
Board startup date: April 23, 2017 12:45:48