Leaderboard

Oh my gosh. It works now LFRAME had to be connected to the point below the cut near the Xyclops chip. This is strange since I already did this and it did not work... But I also noticed, that my ground wire became lose. Maybe this is why it did not work the first time. Anyway, I'm happy! Xbox alive and modded. Now theres just the XBIT to test. I will now install this into the 1.4 box and see if it's dead or not.

As already said, even if I restore the LFRAME cut it won't work. Edit: I'll now take a look at this xbox if it is even working anymore or I really killed it. First, I'll take out the XBIT chip, reconnect the LFRAME and take a look if it boots. If not, the box is dead. If it does, I'll rip out a cheap LPC MOD V2 from a working 1.4 box and install that in the 1.6, before that I'll flash a 1.6 compatible BIOS on the LPC mod. If it then works with the chip, the Xbit is dead. If it still won't work, I just need to wait until my Aladin XT chips arrive, they're definitely 1.6 compatible. I will then install the XBIT in the 1.4 console (where I can also observe, whether the chip is dead or not). If it works there, I'll leave it in the 1.4 box, grab another <1.6 box and install the LPC mod there. Whew. What a hustle.

Works Great!