Leaderboard

This guide and pictures taken from: http://www.biline.ca/xbox_solder.htm TSOP Flashing Unlock points if you are unsure which Xbox version you have click Here TSOP unlock points for version 1.0/1.1 Xbox This is the top of the motherboard Connect the two solder pads at R7D3 as in photo above. This is the bottom side of motherboard Connect the two solder pads at R7R3 as in photo above. All Ver 1.0/1.1 Xbox's with a 'SHARP' TSOP chip must also connect the additional red wire as in the photo above. All other TSOP's DO NOT require this step. TSOP Unlock points for all Versions 1.2/1.3/1.4/1.5/ Xbox's This is the top side of the motherboard These Xbox's have both points located on the top of the motherboard, for the first point connect the two solder pads at R7D10 as in photo above. For the second point locate the junction between R7D2 and R7D1 and connect the two solder pads as in the photo above. After the solder points are completed you should re-assemble your xbox (but leave the top cover off) when the power button is pressed it should boot normally as it did before you started. Note if you get the message TSOP write protected while attempting to Flash the TSOP you might need to check and resolder the points to ensure a good connection was m while attempting to Flash the TSOP you might need to check and resolder the points to ensure a good connection was made. To split Split a 1MB TSOP (v1.0, v1.1) into 4 banks of 256k, the following picture explains how to accomplish this: Note: If you have a 1.6/1.6b Xbox, it has no TSOP and therefore you cannot flash it. You will have to install a modchip or softmod.

Bag, headphones + receiver, orange mem card with cap, live demo disc w/sleeve, live video disc w/sleeve, instructions.

Current development of the XBMC4Gamers can be found by following the source link. Source Download Readme Some Background Info: Ok so this started out as a project for my kids, I wanted to give them a dashboard for just loading games and to allow them to have there own saves, as they were fighting over saves and also to not allow them access to anything they should be accessing. Yeah so you can have profiles that have there own save directory on the Xbox, you have a load of views, synopsis support and a crap load of other features that you can see if you check the change log. All done via XBMC source edits, custom skins and python scripts. Youtube Video Game Posters, banners, fanart, icons, thumbs and tbn files all ready for your Xbox. This is a copy of my Game Posters _resources Directory. It consists of banners for all my games as well as thumbs, icons, posters and fanart where available. It's been setup to work with Origins (as well as the default.xml synopsis format that maybe getting added back in) so compatibility with other skins is paramount in my eyes. Game Resource pack